E-MAIL
sales@sunrise-petroleum.com
HOME
Sucker Rod
Drilling Pipe
Drilling Collar
Metering Pump
About Us
Products
Case
News
Contact Us

Internal coated drill pipe

2023-05-04 18:58 9767 views

‌The inner coating of drill pipe can avoid the direct contact between the inner wall of drill pipe and corrosive drilling fluid, effectively alleviate the corrosion of drill pipe and reduce the flow resistance of natural gas. It is a significant measure to solve the corrosion fatigue failure of drill pipe and improve the drilling and production efficiency of natural gas. Sunrise petro has abundant experience in supply of Internal coated drill pipe.

DESCRIPTION

During the exploitation of sour oil and gas fields, the corrosion of drill pipes is quite serious. The main factors affecting the corrosion include H2S content, CO2 gas partial pressure, Cl concentration, ambient temperature and pressure. Coating to protect drill pipe has been widely used in oil and gas recovery. Among them, polymer epoxy resin and phenolic resin have become protective coatings with research and large-scale production value due to their good high-temperature and high-pressure resistance, chemical medium corrosion resistance and good adhesion.

Practice has proved that the drill pipe inner coating has good corrosion resistance, can prevent moisture, chlorine and corrosive media from entering the surrounding environment, and protect the drill pipe metal body. Internal coating is an important fortress for drill pipe corrosion and protection.

TECHNICAL DATA

The following is Sunrise petro coated layer performance data sheet.

No

Item 

Performance

Standard

1

Appearance

flat, even and smooth without defects such as bubbles and peeling

SYT-0544

2

Dry film thickness

 200 ± 50um

SYT-0544

3

 Leakage point

None

NACE TM0384

4

Adhesion

>= grade B

NACE TM0384

5

Abrasion resistance

>= 2.0 L/um

SY/T 0315

6

Roughness

 liquid  <=2.5um

JJG 2018

 powder <= 0.5um

7

Tensile property

Reach the yield strength of drill pipe without crack

SYT-0544

8

Torsional resistance

Reach the yield strength of drill pipe without crack

MORE DETAILS

Features

1)Overall length polymer epoxy resin and phenolic resincoated

2) Anti-scaling

3)Anti-corrosion and anti-abrasion.

4) Both new and used drilling pipe available

Application

The internal coated drill pipe of Sunrise petro is especially suitable for high water cut oil wells with high corrosion and prone to eccentric wear.

content
  • Carbon Fiber Reinforced Plastic drilling pipe
    With the increasingly difficult exploration and production of oil and natural gas, deep wells, horizontal wells, extended reach wells, sulfur-containing wells and low-temperature wells have higher and higher requirements for drill pipes. Carbon fiber comp
  • Tungsten-plated drilling pipe
    ‌In the drilling process, the failure of drill pipe is a very serious problem. Although the torque, tensile strength, compressive strength, bending stress, etc. of the drill pipe are accurately calculated under ideal conditions before drilling, the corros
  • High strength drilling pipe
    ‌High strength means high yield strength in physical performance. The basic structure and production process of high-strength drill pipes are almost the same as that of conventional drill pipe, while the main difference lies in the selection of materials.
Related
  • High strength drilling pipe
    ‌High strength means high yield strength in physical performance. The basic structure and production process of high-strength drill pipes are almost the same as that of conventional drill pipe, while the main difference lies in the selection of materials.